Showing posts with label CCNP. Show all posts
Showing posts with label CCNP. Show all posts

     

            Network Topology:-

The physical topology of a network refers to the configuration of cables, computers, and other peripherals. Physical topology should not be confused with logical topology which is the method used to pass information between workstations. 

    Main Types of Physical Typologies


                
I. Linear Bus
II. Star
III. Tree (Expanded Star)
IV. Ring


Linear Bus:- A linear bus topology consists of a main run of cable with a terminator at each end . All nodes (file server, workstations, and peripherals) are connected to the linear cable.



 linear bus topology

 

            Advantages of a Linear Bus Topology

  • Easy to connect a computer or peripheral to a linear bus.
  • Requires less cable length than a star topology.

            Disadvantages of a Linear Bus Topology

  • Entire network shuts down if there is a break in the main cable.
  • Terminators are required at both ends of the backbone cable.
  • Difficult to identify the problem if the entire network shuts down.
  • Not meant to be used as a stand-alone solution in a large building.

       Star

A star topology is designed with each node (file server, workstations, and peripherals) connected directly to a central network hub, switch, or concentrator .
Data on a star network passes through the hub, switch, or concentrator before continuing to its destination. The hub, switch, or concentrator manages and controls all functions of the network. It also acts as a repeater for the data flow. This configuration is common with twisted pair cable; however, it can also be used with coaxial cable or fiber optic cable.


 star topology

           

       Advantages of a Star Topology

  • Easy to install and wire.
  • No disruptions to the network when connecting or removing devices.
  • Easy to detect faults and to remove parts.

       Disadvantages of a Star Topology

  • Requires more cable length than a linear topology.
  • If the hub, switch, or concentrator fails, nodes attached are disabled.
  • More expensive than linear bus topologies because of the cost of the hubs, etc.

         

       Tree or Expanded Star

A tree topology combines characteristics of linear bus and star topologies. It consists of groups of star-configured workstations connected to a linear bus backbone cable. Tree topologies allow for the expansion of an existing network, and enable schools to configure a network to meet their needs.


Tree topology

       

          Advantages of a Tree Topology

  • Point-to-point wiring for individual segments.
  • Supported by several hardware and software venders.

          Disadvantages of a Tree Topology

  • Overall length of each segment is limited by the type of cabling used.
  • If the backbone line breaks, the entire segment goes down.
  • More difficult to configure and wire than other topologies.

All devices are connected to one another in the shape of a closed loop, so that each device is connected directly to two other devices, one on either side of it. Ring topologies are relatively expensive and difficult to install, but they offer high bandwidth and can span large distances.






ring topology


XXX

What Is Computer Network?

A network consists of two or more computers that are linked in order to share resources (such as printers and CDs), exchange files, or allow electronic communications. The computers on a network may be linked through mediums such as,cables, telephone lines, radio waves, satellites, or infrared light beams.


           Types of network

  1.                LAN(Local Area Network)
  2.            WAN(Wide Area Network)
  3.                MAN(Metropolitan Area Network)
  4.               CAN(Campus Area Network)
  5.               HAN(Home Area Network)

    

Followers

Translate

Subscribe Us

Enter your email address:

Delivered by FeedBurner

Cooming Soon

Routing Protocols

Popular Posts

Total Pageviews